| Status : | In Production | | Documents : | Visit Microchip | | Volume Pricing : | $5.59 | | CPU Speed MIPS : | 30 | | Memory Type : | Flash | | Program Memory KBytes : | 66 | | RAM : | 2048 | | Code-Guard Security : | Basic | | EEPROM Data Memory : | 1024 | | Temperature Range : | -40 to 125 | | Packages : | 80/TQFP | | I/O Pins : | 68 | | Pin count : | 80 | | System Mgmt Features : | PBOR LVD POR WDT | | Internal Oscillator : | 7.37 MHz 512 kHz | | Hardware RTCC : | No | | Direct Memory Access (DMA) Channel : | 0 | | nanoWatt : | Fast Wake Fast Ctrl | | Comparators : | 0 | | Analog Peripherals : | 16 x 10-bit @ 1000 (ksps) 0-D/A 0 x 0-bit @ 0 (ksps) 1-A/D | | CODEC Interface (I2S, AC97) : | No | | Digital Communication : | 1 -UART 0 -A/E/USART 2 -SPI 1 -I2C 0 -MSSP(SPI/I2C) | | CRC : | No | | Peripheral Pin Select (PPS) Crossbar : | No | | USB : | 0 - USB Ch | | CAN : | 1 - CAN | | LIN : | No | | IrDA : | No | | Capture/Compare/PWM Peripherals : | 0 -CCP 0 -ECCP 4 -Std. PWM 4 -Input Capture | | Timers : | 5 x 16-bit 2 x 32-bit | | Motor Control PWM Channels : | 8 | | SMPS PWM Channels : | | | Quadrature Encoder Interface (QEI) : | 1 | | Parallel Port : | GPIO | | JTAG : | No | | ICSP : | Yes |
|

|
High-Performance Modified RISC CPU:
Modified Harvard architecture
C compiler optimized instruction set architecture
84 base instructions with flexible addressing modes
24-bit wide instructions, 16-bit wide data path
16 x 16-bit working register array
Up to 30 MIPs operation:
- DC to 40 MHz external clock input
- 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
Peripheral and External interrupt sources
8 user selectable priority levels for each interrupt
4 processor exceptions and software traps
Primary and Alternate interrupt Vector Tables
DSP Engine Features:
Modulo and Bit-Reversed Addressing modes
Two, 40-bit wide accumulators with optional saturation logic
17-bit x 17-bit single cycle hardware fractional/ integer multiplier
Single cycle Multiply-Accumulate (MAC) operation
40-stage Barrel Shifter
Dual data fetch
Peripheral Features:
High current sink/source I/O pins: 25 mA/25 mA
Optionally pair up 16-bit timers into 32-bit timer modules
3-wire SPI™ modules (supports 4 Frame modes)
I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
Addressable UART modules with FIFO buffers
Motor Control PWM Module Features:
Complementary or Independent Output modes
Edge and Center Aligned modes
Multiple duty cycle generators
Dedicated time base with 4 modes
Programmable output polarity
Dead time control for Complementary mode
Manual output control
Trigger for synchronized A/D conversions
Quadrature Encoder Interface Module Features:
Phase A, Phase B and Index Pulse input
16-bit up/down position counter
Count direction status
Position Measurement (x2 and x4) mode
Programmable digital noise filters on inputs
Alternate 16-bit Timer/Counter mode
Interrupt on position counter rollover/underflow
Analog Features:
10-bit 1 Msps Analog-to-Digital Converter (A/D)
A/D Conversion available during Sleep and Idle
4 Sample/Hold Channels
Multiple Conversion Sequencing Options
Special Microcontroller Features:
Enhanced Flash program memory:
- 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)
Data EEPROM memory:
- 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
Fail-Safe clock monitor operation
Detects clock failure and switches to on-chip low power RC oscillator
Programmable code protection
In-Circuit Serial Programming™ (ICSP™)
Programmable Brown-out Detection and Reset generation
Selectable Power Management modes
- Sleep, Idle and Alternate Clock modes
CMOS Technology:
Low power, high speed Flash technology
Wide operating voltage range (2.5V to 5.5V)
Industrial and Extended temperature ranges
Low power consumption
dsPIC30F5016
:: :: :: :: :: :: :: :: :: :: :: :: ::
|
|
(C) Copyright 2009 mculabs.com - contact: info@mculabs.com
|
0.065571784973145