Status : In Production Documents : Visit Microchip Volume Pricing : $2.68 CPU Speed MIPS : 30 Memory Type : Flash Program Memory KBytes : 24 RAM : 2048 Code-Guard Security : Basic EEPROM Data Memory : 1024 Temperature Range : -40 to 125 Packages : 18/PDIP 18/SOIC 300mil 44/QFN I/O Pins : 12 Pin count : 18 System Mgmt Features : PBOR LVD POR WDT Internal Oscillator : 7.37 MHz 512 kHz Hardware RTCC : No Direct Memory Access (DMA) Channel : 0 nanoWatt : Fast Wake Fast Ctrl Comparators : 0 Analog Peripherals : 8 x 12-bit @ 200 (ksps) 0-D/A 0 x 0-bit @ 0 (ksps) 1-A/D CODEC Interface (I2S, AC97) : No Digital Communication : 1 -UART 0 -A/E/USART 1 -SPI 1 -I2C 0 -MSSP(SPI/I2C) CRC : No Peripheral Pin Select (PPS) Crossbar : No USB : 0 - USB Ch CAN : LIN : No IrDA : No Capture/Compare/PWM Peripherals : 0 -CCP 0 -ECCP 2 -Std. PWM 2 -Input Capture Timers : 3 x 16-bit 1 x 32-bit Motor Control PWM Channels : SMPS PWM Channels : Quadrature Encoder Interface (QEI) : Parallel Port : GPIO JTAG : No ICSP : Yes

High-Performance Modified RISC CPU:
 Modified Harvard architecture
 C compiler optimized instruction set architecture
 84 base instructions with flexible addressing modes
 24-bit wide instructions, 16-bit wide data path
 16 x 16-bit working register array
 Up to 30 MIPs operation:
	- DC to 40 MHz external clock input
	- Internal FRC input with PLL active (4x, 8x, 16x)
	- 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
	- 10 MHz - 20 MHz oscillator input in HS/2 or HS/3 with PLL active (4x, 8x, 16x)
 Peripheral and External interrupt sources
 8 user selectable priority levels for each interrupt
 4 processor exceptions and software traps
 Primary and Alternate interrupt Vector Tables
DSP Engine Features:
 Modulo and Bit-Reversed Addressing modes
 Two, 40-bit wide accumulators with optional saturation logic
 17-bit x 17-bit single cycle hardware fractional/ integer multiplier
 Single cycle Multiply-Accumulate (MAC) operation
 40-stage Barrel Shifter
 Dual data fetch
Peripheral Features:
 High current sink/source I/O pins: 25 mA/25 mA
 Optionally pair up 16-bit timers into 32-bit timer modules
 3-wire SPI™ modules (supports 4 Frame modes)
 I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
 Addressable UART modules with FIFO buffers and selectable pins
Analog Features:
 12-bit 200 Ksps Analog-to-Digital Converter (A/D)
 A/D Conversion available during Sleep and Idle
 1 Sample/Hold
 Multiple Conversion Sequencing Options
Special Microcontroller Features:
 Enhanced Flash program memory:
	- 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)
 Data EEPROM memory:
	- 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
 Self-reprogrammable under software control
 Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
 Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
 Fail-Safe clock monitor operation
 Detects clock failure and switches to on-chip low power RC oscillator
 Programmable code protection
 In-Circuit Serial Programming™ (ICSP™)
 Programmable Brown-out Detection and Reset generation
 Selectable Power Management modes
	- Sleep, Idle and Alternate Clock modes
	
CMOS Technology:
 Low power, high speed Flash technology
 Wide operating voltage range (2.5V to 5.5V)
 Industrial and Extended temperature ranges
 Low power consumption

Comming Soon!

:: Home :: Resources :: PIC Microcontrollers :: :: 10F :: 12F :: 16F :: 18F :: 24F :: 24H :: 30F :: 33F ::

(C) Copyright 2009 mculabs.com - contact: info@mculabs.com

0.05150294303894