| Status : | In Production | | Documents : | Visit Microchip | | Volume Pricing : | $3.07 | | CPU Speed MIPS : | 16 | | Memory Type : | Flash | | Program Memory KBytes : | 64 | | RAM : | 8192 | | Code-Guard Security : | Basic | | EEPROM Data Memory : | 0 | | Temperature Range : | -40 to 85 | | Packages : | 44/QFN
44/TQFP | | I/O Pins : | 35 | | Pin count : | 44 | | System Mgmt Features : | BOR
LVD
POR
WDT | | Internal Oscillator : | 8 MHz
32 kHz | | Hardware RTCC : | Yes | | Direct Memory Access (DMA) Channel : | | | nanoWatt : | Low Sleep
Fast Wake
Fast Ctrl | | Comparators : | 3 | | Analog Peripherals : | 13 x 10-bit @ 500 (ksps)
1-A/D | | CODEC Interface (I2S, AC97) : | | | Digital Communication : | 2 -UART
2 -SPI
2 -I2C | | CRC : | Yes | | Peripheral Pin Select (PPS) Crossbar : | Yes | | USB : | 1 - USB Ch.
Full Speed
USB 2.0 OTG | | CAN : | None | | LIN : | Yes | | IrDA : | Yes | | Capture/Compare/PWM Peripherals : | 5 -Std. PWM
16-bit PWM resolution
5 -Input Capture | | Timers : | 0 x 8-bit
5 x 16-bit
0 x 32-bit | | Motor Control PWM Channels : | | | SMPS PWM Channels : | | | Quadrature Encoder Interface (QEI) : | | | Parallel Port : | PMP | | JTAG : | Boundary Scan | | ICSP : | Yes |
|
|
CPU
Up to 16 MIPS performance
16 x 16 Hardware Multiply, Single Cycle Execution
32-bit x 16-bit Hardware Divider
C Compiler Optimized Instruction Set
System
Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL
On-chip LDO Voltage Regulator
JTAG Boundary Scan and Flash Memory Program Support
Fail-Safe Clock Monitor – allows safe shutdown if clock fails
Watchdog Timer with separate RC oscillator
nanoWatt Power Managed Modes
Run, Idle and Sleep modes
Deep sleep mode for lowest current consumption
Multiple, Switchable Clock Modes for Optimum Performance and Power Management
Analog Features
10-bit ADC, 13 channels, 500k samples per second
3 analog comparators
Other Peripherals
2 UART Modules with LIN and IrDA® support, 4 Deep FIFO
2 SPI Modules with 8 Deep FIFO
2 I2C™ Modules with Master and Slave Modes
Five 16-bit Timer Modules
Up to 5 Input Capture and 5 Output Compare / PWM, all with dedicated timers
Hardware RTCC, Real-Time Clock Calendar with Alarms
PMP, Parallel Master Port, with 16 Address Lines, and 8/16-bit Data
Peripheral Pin Select for remapping digital peripherals to I/O
Charge Time Measurement Unit (CTMU) for capacitive touch interface
Universal Serial Bus Features
USB v2.0 On-the-Go compliant
Dual role capable, can act as either Host or Device
Low Speed(1.5Mb/s) and Full Speed(12 Mb/s) operation in Host mode
Full speed USB operaton in Device mode
Supports 32 endpoints
On-chip USB transceiver
PIC24FJ64GB004
:: :: :: ::
:: :: :: :: :: :: :: :: ::
|
|
(C) Copyright 2009 mculabs.com - contact: info@mculabs.com
|
0.085944890975952
